U-Reach Carry HDD miniSAS Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 24

U-Reach Carry HDD miniSAS Скачать руководство пользователя страница 11

10

2. Compare

The compare function is used to check if the data on source HDD is identical to
target HDD after duplication.

➢

Start to compare

Step 1: Prepare Source and Targets

Prepare the source HDD and target HDDs to compare after duplication is
completed.

Step 2: Connect Source and Targets

Connect the source HDD to Source port, target HDDs to Target ports.

Step 3: Enter "2.Compare"

Use

▲▼

to select “2.Compare” then press “OK”. Data compare will proceed.

Step 4: Completion!

The result (Pass/Fail) and time will show on LCD after comparison completes.

Caution

The user is responsible for verifying

the targets’ quality. Please

pick a few completed targets for testing in a mass production
environment for QC.

3. Copy+Compare

The Copy+Compare function makes copies first and then compares copied
HDDs with source HDD to confirm the accuracy.

Note

It is recommended to execute Compare after Copy to confirm
the accuracy. Users can use the

function “3. Copy+Compare”.

«
...
9
10
11
12
13
...
»

Содержание Carry HDD miniSAS

























Отзывы:

Нет отзывов