15
Figure. 7a.
Dimensions, modification 1
Figure. 7b.
Dimensions, modification 2
When zone shorted, it means the remote activation command and module activates
corresponding relay. If zones not used, terminate them with 2.2 kOhm end-of-line
resistors.
Loop's connection examples show in Fig. 6
Figure 6
. Loop's connection examples
How to work with the device
U-Prox IC L control panel shipped in
the plastic enclosure without the
power supply. Dimensions marked
on the Fig. 7.
Connection
1.
Perform initial network setup
of
control
panel
(that
specifies settings of network
parameters)
with
utility
"Configurator"
via
USB
port
before
installation, if it is
impossible to adjust
them automatically
2.
Prepare the place for
installation mark and
drill mounting holes
(see
Mount
recommendations
)
3.
Perform
Ethernet
wiring