U-Line UCBR532-SS01A страница 23 Скачать руководство пользователя

Страница: 23 / 49

USER GUIDE

Cleaning

CLEANING VS. SANITIZING

This guide will address both the cleaning and the sanitizing
of the unit.

Clean the unit to remove dried food and spills, to prevent
build-up of grime, and to maintain the natural luster
stainless steel surfaces.

Sanitize the unit when exposed to raw meat juice or
human germs such as from a sneeze or being touched by
someone who is ill. Sanitizing the unit can also be part of
regular cleaning routine.

Stainless Surfaces

Stainless door panels, handles and frames can discolor
when exposed to chlorine gas, pool chemicals, saltwater or
cleaners with bleach.

Keep your stainless unit looking new by cleaning with a
good quality all-in-one stainless steel cleaner and polish
monthly. For best results use Claire

Stainless Steel

Polish and Cleaner. Comparable products are acceptable.
Frequent cleaning will remove surface contamination that
could lead to rust. Some installations may require cleaning
weekly.

Do not clean with steel wool pads.
Do not use stainless steel cleaners or polishes on
any glass surfaces.

Clean any glass surfaces with a non-chlorine glass cleaner.

Do not use cleaners not specifically intended for
stainless steel on stainless steel surfaces (this
includes glass, tile, and counter cleaners).

If any surface discoloring or rusting appears, clean it
quickly with Bon-Ami

or Barkeepers Friend Cleanser

and

a nonabrasive cloth. Always clean with the grain. Always

finish with Claire

Stainless Steel Polish and Cleaner or

comparable product to prevent further problems.

Using abrasive pads such as ScotchBrite™ will
cause the graining in the stainless steel to
become blurred.

Rust not cleaned up promptly can penetrate the
surface of the stainless steel and complete
removal of the rust may not be possible.

CLEAN INTERIOR COMPONENTS

Use warm or hot water with dish soap to clean all removed
components and interior surfaces. You may use a vinegar and
water solution in place of soap. Proceed to sanitizing.

Note: Cleaning soaps and vinegar solutions are not
sanitizers.

SANITIZE INTERIOR COMPONENTS AND SURFACES

Choose a Commercial Sanitizer Safe for Stainless
Steel

• Read the directions for proper use to ensure that the

surface will actually be sanitized

• Many products require rinsing with water after use,

especially when food will be touching the surface

• Some products require a wait time before rinsing

• Verify the sanitizer you are using is safe for stainless

steel.

Mix Your Own Sanitizer

Isopropyl Alcohol (rubbing alcohol)

1.  Fill a clean, empty spray bottle with isopropyl alcohol
2.  Spray surface
3.  Wait 20 minutes
4.  Dampen a non-abrasive cloth with isopropyl alcohol and

wipe down surface

5. Dry surface with a clean dry non-abrasive cloth

Unscented Bleach and Water

1. Create a solution of 1 tablespoon of unscented bleach

with one gallon of water.

2. Submerse small parts for no more than 3 minutes - rinse

immediately and allow to air dry or dry with a disposable
paper towel.

3.  Fill a clean, empty spray bottle with bleach solution.
4.  Spray surface.
5.  After 2-3 minutes, use clean potable water to thoroughly

rinse off surface. Allow to air dry or dry with a disposable

paper towel.

6. Sanitize the door and all holes where the hinges attach to

the unit and the brackets attach to the door as well as all
the screws.