USER GUIDE
Wine Rack Installation
Wine Rack Installation
To remove rack from the cabinet:
NOTE: WINE RACKS ARE NOT INCLUDED WITH
THIS UNIT AND ARE SOLD AS ACCESSORIES
ONLY.
1. Remove any bottles stored on the rack.
2. Grasp the front end of the rack, tilt upward and lift out
of the rear shelf ladder.
3. Pull the rack out until it is free of the cabinet.
To insert rack in the cabinet:
1. Grasp the front end of the rack and insert into the
cabinet.
2. Tilt the front end of the rack upward and align the left
and right upper tabs with the slots in the rear shelf
ladder at the desired height.
3. Lower the front of the rack to seat the lower tabs into
the rear shelf ladder.
4. Gently press on the top of the rack to ensure there is
no movement and everything is seated properly.
5. Before reloading the rack, ensure proper movement
of the travel stops in the left and right track rails by
pulling the rack out gently until it stops.
Upper Tab
Lower Tab
26
Содержание UCBR532-SS01A
Страница 1: ...USER GUIDE SERVICE MANUAL Model UCBR532 SS01A...
Страница 30: ...USER GUIDE Wire Diagram 32 52 30...
Страница 31: ...USER GUIDE Wire Diagram 72 92 31...
