USER GUIDE
Door Adjustments
3. Remove hinge pin from top hinge using a 1/8” hex key
tool. Rotate hinge pin clockwise to remove. Set aside.
4. On the bottom hinge use a Philips screwdriver to
remove screw holding the plastic door closer.
5. Reinstall plastic door closer on the other hinge
(formerly the top hinge).
6. With 1/8” hex key install hinge pin onto top hinge
(formerly the
bottom hinge) until
even with surface
of hinge.
7. Install top and
bottom hinges on opposite side of cabinet. Install 3
leftover screws into the open holes.
8. Install top and bottom lock brackets.
Door Adjustments
REVERSING THE DOOR
Location of the unit may make it desirable to mount the
door on the opposite side of the cabinet.
The hinge hardware will be removed and reinstalled on the
opposite side of the cabinet.
TO REVERSE THE DOOR
Note: When reversing the door, the top hinge
becomes the bottom hinge on the opposite side
of the unit - likewise, the bottom hinge becomes
the top on the other side.
REMOVE DOOR
1. With door closed, remove hinge pin from bottom hinge
using a Philips screwdriver.
2. Remove the door by lifting it slightly and pulling
bottom of door toward you until clear of the bottom
hinge.
MOVE HINGES TO OPPOSITE SIDES
Note: When removing hardware from the unit,
keep all screws and parts handy, they will all be
needed.
1. Using a Phillips
screwdriver, remove
both hinges by taking
out 6 screws. Also
remove 6 screws from
the other side.
2. With the same Philips
screwdriver, remove
4 screws holding the
lock brackets. The
lock brackets will
be installed on the
opposite side.
Remove Hinge Pin
with Philips Screwdriver
Plastic
Door Closer
Door Closer
Screw
Door Closer
Screw
LOCK
BRACKET
REMOVE
HINGE SCREWS
REMOVE
HINGE SCREWS
LOCK
BRACKET
17
Содержание UCBR532-SS01A
Страница 1: ...USER GUIDE SERVICE MANUAL Model UCBR532 SS01A...
Страница 30: ...USER GUIDE Wire Diagram 32 52 30...
Страница 31: ...USER GUIDE Wire Diagram 72 92 31...
