PAGE 1 OF 3
0821 IS-107
π
S-107, S-1717
POLY STRAPPING KIT
1-800-295-5510
uline.com
INSTRUCTIONS
THREADING METAL BUCKLES
1. Insert end of strapping up through center of the
buckle and around open leg to form a loop.
Pull top tight around leg. (See Figure 1)
2. Wrap strapping around package. Loop strapping
around remaining open leg of buckle. Pull loop
tight around leg. (See Figure 2)
3. Pull both top ends of strapping in the opposite
direction to manually tighten. (See Figure 3)
USING TENSIONER AND CUTTER
1. Place strapping between tensioner rods. Raising the
handle, flip tool 360 degrees. (See Figure 4)
2. Pull tool to desired level of tension. (See Figure 5)
3. Use blade on side of tool to cut away excess
strapping. (See Figure 6)
Figure 3
Figure 4
Figure 2
Figure 1
Figure 5
Figure 6
Para Español, vea página 2.
Pour le français, consulter la page 3.
