U-Line ih-1060 Скачать руководство пользователя страница 1

Страница: 1 / 2

1211 IH-1060

PAGE 1 OF 2

PARTS LIST

TOOLS NEEDED

Board (E) or Wire (F) x 3 (or 6)

ASSEMBLY

NOTE: Lean posts against a wall or assemble with
another person.

1. Connect two upright posts (A) by inserting a side

support piece (B) at the bottom and top of the posts.

(See Figure 1)

2. Repeat step one for the other two upright posts (A).

Rubber Mallet

Figure 1

Upright Post x 4 (A)

Center Support x 3 - 9 (D)

Side Support x 6 (B)

Front/Back Support x 6 (C)

WIDE SPAN
STORAGE RACKS

NOTE: Boards and wire
come as two pieces for 60,
72, and 96" wide racks.

Содержание ih-1060

Страница 1: ...o upright posts A by inserting a side support piece B at the bottom and top of the posts See Figure 1 2 Repeat step one for the other two upright posts A Rubber Mallet Figure 1 B A B Upright Post x 4...

Страница 2: ...for installation of all other front back supports 6 Attach shelf supports D at each level by placing the keyhole slots on shelf support over the rivets on the inside of the front back support and tapp...