U-Line H-8263 Скачать руководство пользователя страница 1

Страница: 1 / 6

PAGE 1 OF 6

0421 IH-8263

1-800-295-5510

uline.com

96 x 48" MEDIA

CONFERENCE TABLE

H-8263

NOTE: Check that all parts are included. The
four M3.5 x 10 mm screws (F) come packaged
with the power center.

NOTE: Table also includes flat bracket and
six extra M6 x 15 mm bolts for the option to

connect two tables.

1. Fit support rail (1) over corresponding bracket on

narrow leg (2). Secure using four M6 x 12 mm bolts

(D). Repeat to attach three remaining support rails.

(See Figure 1)

2. Attach all support rails (1) to wide leg (3) using four

M6 x 12 mm bolts (D) per rail. (See Figure 1)

NOTE: Do not fully tighten bolts until tabletop is
attached.

3. Place tabletop (4) on assembled frame. Attach

tabletop (4) to narrow leg (2) using two M6 x 45 mm

bolts (A). Secure wide leg (3) using three M6 x 45 mm

bolts (A). (See Figure 2)

4. Attach tabletop (4) to brackets on legs using two

M6 x 15 mm bolts (B) per bracket. (See Figure 2)

5. Secure tabletop (4) to support rails (1) using five

M6 x 60 mm bolts (C) per rail. (See Figure 2)

6. Tighten bolts (D) installed in Steps 1 and 2 with Allen

wrench.

TOOLS NEEDED

PARTS

ASSEMBLY

Bolt x 5

M6 x 45 mm

Screw x 4

M3.5 x 10 mm

Adhesive-Backed

Cable Clip x 4

Bolt x 12

M6 x 15 mm

Bolt x 20

M6 x 60 mm

Bolt x 32

M6 x 12 mm

Flat Bracket x 1

Follow hole patterns

on frame as shown.

Figure 1

Allen Wrench

(Included)

Phillips

Screwdriver

Figure 2

Three Person Assembly

Recommended

Para Español, vea páginas 3-4.

Pour le français, consulter les pages 5-6.

Содержание H-8263







Результаты поиска

Содержание H-8263

Отзывы:

Бренды по названию

Популярные бренды

U-Line H-8263, Руководство пользователя

Результаты поиска

Содержание H-8263

Отзывы:

Бренды по названию

Популярные бренды