PAGE 1 OF 6
0621 IH-7983
H-7983
BANDAGE DISPENSER
1-800-295-5510
uline.com
SCREW MOUNTING
1. Using the key, push release latch to open front cover
of dispenser. The latch is located on the top edge in
the center. (See Figure 1)
2. Pop out hole plugs. (See Figure 2)
3. Hold dispenser to ideal mounting place on wall.
4. Mark two locations on wall where screws will be
inserted.
PARTS
TOOLS NEEDED
MOUNTING INSTRUCTIONS
Drill
Drill Bit
Phillips Screwdriver
Rubber Mallet
Dispenser x 1
Wall Anchor x 2
Screw x 2
Adhesive Strip x 2
Key x 1
Figure 1
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.