PAGE 1 OF 6
0521 IH-7162
π
H-7162
24" LED LIGHT
1-800-295-5510
uline.com
SAFETY
MOUNTING
CAUTION!
Read all instructions and warnings
before operating.
WARNING! To avoid serious injury or death from
electrical shock or fire adhere to the following
safety warnings.
• Do not plug in LED light when hands are wet or
damp, or when standing on a wet or damp surface
or in water.
• Always use in accordance with electrical and
safety codes and ordinances, including the most
recent National Electric Code (NEC) and with the
Occupational Safety and Health Act (OSHA) Volume 1
on General Industry Standards and interpretations.
• Always ensure the power source conforms to the
requirements on the light.
• Always disconnect the power before servicing or
inspecting the LED light for any reason.
• For use only on 110V-125V (single phase) and is
equipped with an approved polarized plug.
IMPORTANT! The LED light has a polarized
attachment plug (one blade is wider than
the other). The plug fits in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, rotate the plug. If it still does not fit,
contact a qualified electrician.
• Do not use an extension cord unless the plug can
be fully inserted.
• The LED light is not waterproof and is not intended for
use in showers, saunas or in potentially wet locations.
The entry of moisture into the light may cause
damage and void warranty.
• For indoor use only. Do not use in flammable or
explosive atmospheres. Potential ignition may occur.
• Keep away from heating vents, radiators, or other
sources of heat.
• Keep out of reach of children.
1. The LED light comes with two magnets (A) for
attaching to most metal surfaces.
2. Adjust the magnet positions for proper mounting
distance:
a. Use a Phillips screwdriver to loosen the screw (B).
b. Slide the magnet (A) to desired position, then
tighten the screw to lock in position.
NOTE: Do not remove the screw from the
magnet.
3. Plug into any 110-125V standard wall outlet.
4. Press the switch (C) to turn on the light. Press again to
turn off the light.
A
B
C
TOOL NEEDED
Phillips Screwdriver
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
