PAGE 1 OF 6
0823 IH-6570
6' LAGUNA BENCH
1-800-295-5510
uline.com
H-6570
PARTS
ASSEMBLY
CAUTION! Do not drive attachment screws too
deeply, as the screw could protrude through
slat on the seating side of bench.
1. Verify all parts are present before beginning.
2. With one person holding the left leg and another
person holding the right leg, insert a rounded-edge
board between each leg, in line with the front of
the legs. From underneath, attach the front board
to the supports by fastening screws through the
pre-drilled holes on the underside of the leg. Do not
overtighten. (See Figure 1)
3/8" Spacer x 2
Seat and Back
Board x 6
Front and Top Board
with Rounded Edge x 2
Left Leg x 1
Center Leg x 1
Right Leg x 1
Square Head Screw x 64
TOOL NEEDED
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Figure 1
Power Drill
Square Head Bit
Two Person Assembly
Recommended
