PAGE 1 OF 6
0321 IH-4988
H-4988
72
x
48" JUMBO
PACKING TABLE
1-800-295-5510
uline.com
LEGS AND FRAME ASSEMBLY
1. Insert adjustable feet (1) into legs (2) and slide into
place at desired height.
NOTE: If desired, insert locking tabs through
legs and adjustable feet to lock feet into place.
2. Place legs (2) in upright position. Legs should be
placed approximately 65" apart.
3. Attach stringer (3) to table legs using center four
holes in back legs. Fasten with eight bolts, lock
washers and nuts, but do not fully tighten.
(See Figure 1)
ASSEMBLY
#
DESCRIPTION
QTY
1
Adjustable Foot
4
2
Leg
2
3
Stringer
1
4
Lower Shelf
1
5
Tabletop
1
3
1
2
4
5
TOOLS NEEDED
Phillips Head
Screwdriver
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
WARNING! These instructions are for Jumbo Packing Tables only. Instructions for Deluxe Workstations are
included with H-5777 Uprights for Deluxe Workstation.
7/16" Wrench
3/8" Wrench
10 mm Wrench
1/4"-20 x 5/8" Bolt x 16
#14-3/4" Wood Screw x 16
1/4"-20 Nut x 16
Lock Washer x 8
Locking Tab x 4
Hardware Kit
Flat Head
Screwdriver
PARTS
Figure 1
