PAGE 1 OF 2
0214 IH-4618
π
H-4618, H-4619
5 cHannel caBle
PROTecTOR
1-800-295-5510
uline.com
cOmPOnEnts
AssEmbly
Interlock with dog-bone connectors to extend protection
length. (see Figure 1)
• Inspect areas for safety hazards.
• Assemble sections by aligning female connectors
over male connectors and press with foot to secure.
• Using through-holes, fasten protector to ground
(optional - see mounting Instructions).
• close cover flush with base.
• test installation for intended use.
• Periodically inspect installation.
cHAnnEl cAPAcIty
channel capacity - max. diameter inches
4 Outer channels
1.339" width x 1.325" height
center channel
1.704" width x 1.325" height
lOAd cAPAcIty
the 5 channel cable Protector has different load
supporting capabilities depending on type of vehicle
and temperature. suitability must be verified by testing
under actual conditions.
load-supporting capacity varies by type of loading
conditions and environmental conditions. the load
capacity decreases in warm environments. test before
use and inspect periodically.
model
no.
load capacity per tire
max load 70°F (21°c)
load capacity per axle
max load 70°F (21°c)
H-4618
10,500 lbs.
21,000 lbs.
OPErAtInG tEmPErAtUrE
-40° to 120°F (-40° to 48°c)
cHEmIcAl rEsIstAncE
tested for compatibility with common motor oils, gasoline
and diesel fuel. limited resistance to brake fluids and
other chemicals.
mAtErIAl
UV-stabilized polyurethane elastomer.
instrUctions
Figure 1
36" lineal Protector
End cap
End cap
