PAGE 1 OF 3
0219 IH-4176
π
H-4176
WALL-MOUNT FLAMMABLE
STORAGE CABINET
1-800-295-5510
uline.com
PARTS
GROUNDING INSTRUCTIONS
NOTE: To ensure safety in facilities, it's important to eliminate the chance of an electrostatic discharge
while handling flammable fluids.
CAUTION! If user will dispense Class 1 flammable liquids from a container held within safety cabinet, ground
the cabinet. As an industry best practice, it is recommended to ground the cabinet when dispensing Class 2
combustible liquids if the liquids are near, at, or above the liquid's flashpoint temperature. Be aware of these
external and internal grounding considerations.
1. For exterior cabinet grounding, locate the safety
cabinet's ground screw just below the green dot on
the right-hand side. (See Figure 1)
2. Use a 5/16" (8 mm)
wrench or nut driver to
loosen screw.
(See Figure 2)
Attach the ground wire
and retighten screw.
#12 - 2⁄" TEK Screw x 2
Bolt x 3
Washer x 3
Nut x 3
Internal Tooth
Lockwasher x 3
Spacer x 2
Self-Tapping Screw x 2
Figure 1
Ground
Screw
TOOLS NEEDED
5/16" (8 mm) Socket Wrench
Electric Drill
1/8" Drill Bit
1/4" Drill Bit
Figure 2
Ground Screw
Connection
