PAGE 1 OF 15
0221 IH-4025
H-4025
GREEN MACHINE
AIR PILLOW MACHINE
1-800-295-5510
uline.ca
SPECIFICATIONS
SAFETY INSTRUCTIONS
The Uline Green Machine converts rolls of pre-perforated,
sealed flat tubing into air cushions for use as void fill
packaging.
CAUTION! For safety reasons the cushions are
to be used ONLY as a packaging material and
MUST NOT be used as a flotation aid, a toy or
for other unspecified use.
Operators must never use the machine other than as
specified by the instructions in this manual.
1. Removal of the front cover will void the warranty.
2. Keep hands away from all moving parts while
operating machine.
3. The machine will automatically shut down in the
event of a jam. To restart the machine, clear the jam
and press reset. Press the start button to restart.
4. Do not place flammable materials over the heat
sealing section.
5. In the event of an emergency, press the red
emergency stop button. To restart the machine,
rotate the emergency stop button so that it springs
out to the normal operating position.
NOTE: THE EMERGENCY STOP BUTTON IS ONLY TO
BE USED FOR EMERGENCIES. For normal start
and stop, use the start/stop button.
6. If the machine is to remain inactive for longer
periods of time, the machine should be switched
off using the main power switch located where the
power cable enters the machine.
TECHNICAL SPECIFICATIONS
Machine Dimensions (L x W x H)
14 x 12 x 11"
Machine Weight
19 lbs.
Power Supply
110V
Film Material
High-Density Polyethylene
Tubing
Roll Length
1,640' or 1,066'
Roll Width
8" or 16"
TOOLS NEEDED FOR MAINTENANCE
4mm Allen
Wrench
3mm Allen
Wrench
Needle Nose
Pliers
Para Español, vea páginas 6-10.
Pour le français, consulter les pages 11-15.
