0115 IH-2999
PAGE 1 OF 2
π
H-2999
6' WOODEN
PICNIC TABLE
1-800-295-5510
uline.com
Prior to assembling your table, apply two coats of water
repellent to the table components.
1. Place the pre-drilled seat cross-member on top of
the pre-drilled table legs. Position the legs so the
holes are aligned and the tops of the legs are level
and straight. (See Figure 1)
NOTE: There are predrilled holes on one end
of the table legs, these should be on the top of
the assembled legs.
2. Loosely attach with the 3½" carriage bolts through
the pre-drilled holes using the washers and nuts.
Repeat for the second leg.
PARTS
Preassembled Table Top x 1
72" Seat Plank x 4
59" Pre-Drilled Seat Cross-Member x 2
23.5" Diagonal Brace x 2
10" Seat Block x 2
3½" Carriage bolt x 8
2½" Wood Screw x 36
Washer x 8
Nut x 8
30" Pre-Drilled Table Leg x 4
TOOlS NEEDED
Drill
Tape Measure
7/16" Socket Wrench
1/8" Drill Bit
Level
Figure 1
ASSEMBlY
