PAGE 1 OF 12
0521 IH-2932
DIGITAL
KEY CABINET
1-800-295-5510
uline.com
H-2932, H-4734, H-6265
H-7176, H-7766
FEATURE
KNOB
KEYPAD
BUTTONS
PROGRAM
BUTTON
GREEN AND
RED LEDS
YELLOW
LED
FUNCTION
Moves lock mechanism
90 or 180 degrees
clockwise or
counterclockwise
to lock and unlock
cabinet.
For entering and
programming lock
codes.
Initiate programming
mode by pressing the
front thin edge of the
black button.
Will flash and
illuminate to indicate
operating conditions.
Will flash five times
after lock is operated
to signify the battery
level is low and should
be replaced.
OVERVIEW OF CONTROLS
INSTRUCTIONS
This lock can operate using 3 codes (factory or master
code, supervisor code and user code).
Factory/Master Code – This code must
be reprogrammed to a 6-digit master
code. (See Page 2)
Supervisor/User Codes – 3 to 6 digits
need to be programmed into
the lock by following the steps. All
codes are retained by the lock after
unlocking and if the battery is changed.
A Note on Codes – The numbers 6, 7, 8 and 9 can be
entered by pressing two keys simultaneously in order to
produce a sum.
For example, 2 and 4 can be pressed simultaneously to
produce the number 6.
NOTE: If the code was programmed using
2 + 4 as the 6 digit, the 2 + 4 must be used
when accessing the lock. Other combinations
that equal six, such as 1 + 5, are distinguished
from 2 + 4.
5
5
5
6
5
5
50
5
49
2
5
28
5
27
3 4 5
2
1
ELECTRONIC LOCK
ELECTRONIC LOCK FEATURES
#
DESCRIPTION
1
Knob
2
Keypad
3
Battery Holder With Cover
4
Program Button
5
Yellow LED – Low Battery
6
Red LED – Error
7
Green LED – Proceed
1
3
4
5
6
7
2
ELECTRONIC LOCK FUNCTIONS
Factory/Master
Code
Supervisor Code
3-6 Digits
User Code
3-6 Digits
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
