PAGE 1 OF 6
0421 IH-2920
1-800-295-5510
uline.com
MAIL SORTER
H-2920, H-2921, H-2922
H-4468, H-4469
PARTS
Mail Sorter Unit x 1
Rubber Foot x 4
Nut x 4
1/2" Bolt x 2
3/8" Bolt x 2
ASSEMBLY
1. To prevent sliding or scratching when mounting an
individual rack directly on the floor or on a desk, attach
self-adhesive rubber feet to four bottom corners.
(See Figure 1)
2. When combining modular units to construct a larger
rack, place individual racks on top of each other,
making sure to line up the mounting holes located on
the top and bottom of each unit. (See Figure 2)
NOTE: For H-4468, stack two 15-compartment mail
sorters on top of each other. For H-4469, stack three
15-compartment mail sorters on top of each other.
3. Insert four bolts provided into recessed mounting holes.
Use the 1/2" bolts for the rear holes and the 3/8" bolts for
the front holes. Attach four nuts provided and tighten
securely using Phillips screwdriver and 3/8" wrench.
Repeat this procedure until all racks are connected.
(See Figure 3)
Figure 1
Figure 2
Align Vertically
Figure 3
TOOLS NEEDED
Phillips Screwdriver
Power Drill
1/4" Drill Bit
1/16" Drill Bit
Screw x3
(Included)
(Optional)
Drywall Anchor x3
(Included)
(Optional)
TOOLS NEEDED FOR OPTIONAL WALL MOUNTING
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
3/8" Wrench
