PAGE 1 OF 2
0620 IH-1592
π
H-1592
CHROME TOILET SEAT
COVER DISPENSER
1-800-295-5510
uline.com
TOOLS NEEDED
Drill
Drill Bit
Phillips Screwdriver
Dispenser x 1
Wall Anchor x 2
Screw x 2
Level
Tape Measure
PARTS
MOUNTING INSTRUCTIONS
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition.
Enclosed hardware may not be compatible
with wall surface.
1. Hold dispenser up to desired location and mark two
holes on the wall where screws will be inserted.
(See Figure 1)
2. Drill into wall at two marked locations with
appropriate-sized drill bit. Insert wall anchors if
necessary. (See Figure 2)
3. Hold dispenser over previously drilled holes and
insert screws.
Figure 2
RECOMMENDED MOUNTING
LOCATION
Figure 1
