PAGE 1 OF 3
0421 IH-1546
1-800-295-5510
uline.com
ROLLING CLOTHES
RACK
H-1546
INSTRUCTIONS
TO ASSEMBLE RACK
1. Place rack base on ground and fold up arms.
2. Pull arms outward until uprights are stretched into
complete vertical position; then, insert hang bar
into arms. (See Figure 1)
3. To increase height pull up extensions if needed.
NOTE: Hang bar can be lengthened by pulling
out ends of hang bar.
FOR EASY TRANSPORTATION AND STORAGE
NOTE: To attach clamps, first remove screws
from base.
1. Remove hang bar, push in extensions if applicable,
and fold down arms.
2. Attach clamps using locking washers and screws.
(See Figure 2)
3. Snap hang bar into clamps.
PARTS LIST
Rack Hang Bar x 1
Rack Base x 1
Clamp x 2
Locking Washer x 2
Red Hardware Bag
Figure 1
Figure 2
Extensions
Para Español, vea página 2.
Pour le français, consulter la page 3.
