PAGE 1 OF 9
1118 IH-1485
STANDARD LIFT TABLE
1-800-295-5510
uline.com
π
H-1485, H-1486, H-1487
H-1783, H-6754
SPECIFICATIONS
H-1485
H-1486
H-1487
H-1783
H-6754
Capacity
330 lbs.
660 lbs.
1,100 lbs.
1,760 lbs.
1,100 lbs.
Height Raised
29"
35"
35"
39.5"
36"
Height Lowered
8.8"
11"
11"
16.5"
12.5"
Table Size
27 x 18 x 2"
32 x 20 x 2"
32 x 20 x 2"
39
½
x 20 x 2"
63 x 31.5 x 2"
Total Height
37"
39"
39"
39"
39"
Overall Length
31"
37"
37"
46"
65"
Foot Pedal Cycles to Max Height
25
32
45
56
40
Wheel Diameter
4"
5"
5"
6"
5"
Weight
101 lbs.
165 lbs.
187 lbs.
254 lbs.
296 lbs.
Working Volume of Oil Cylinder
138 ml
164 ml
164 ml
157 ml
200 ml
Oil Capacity
210 ml
250 ml
250 ml
240 ml
300 ml
1. Read all instructions carefully before operating the
lift table.
2. DO NOT overload the lift table and always operate
it within the rated load. Overloading will cause
damage to the lift table and the operator.
3. DO NOT stand or sit on the table to work.
4. DO NOT put hands or feet under the table when
lowering.
5. Apply the brakes while loading to prevent the table
from moving.
6. The load must be distributed uniformly across the
whole table.
7. DO NOT load loose or unstable loads onto the table.
8. DO NOT leave the table loaded for extended
periods of time.
9. DO NOT move the truck while lifting.
10. The table should only be used on flat solid surfaces.
11. Make sure not to overload the table when it is in
the raised position. The safety valve only works as
the table is lifted. Overloading in the raised position
may damage the table.
12. When loading and unloading goods in the raised
position, do not drag loads across the table.
This may cause offset loading and the table may
turn over.
13. When maintaining and repairing the table, the
stand bar should be used to support the fork arm in
order to prevent table from falling. There should not
be a load on table while maintaining and repairing
the table.
TECHNICAL INFORMATION
GENERAL INFORMATION
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
