PAGE 1 OF 9
0721 IH-6526
H-6526
SPIN MOP SYSTEM
1-800-295-5510
uline.com
1. Fully extend mop handle by turning the center
section to the "on" position. After fully extending the
handle, turn the center section to the "off" position.
(See Figure 1)
2. Grip threaded collar and remove from mop head
attachment. Then, put threaded collar back on mop
head attachment and loosely attach by turning
threaded collar clockwise two turns. (See Figure 2)
NOTE: Do not completely tighten threaded
collar.
3. Place mop handle into mop head attachment and
tighten down threaded collar until snug. (See Figure 3)
NOTE: Do not overtighten.
4. Place foot on mop head attachment and pivot mop
handle into upright position. (See Figure 4)
PARTS
ASSEMBLY
Figure 1
Figure 2
Bucket x 1
Threaded Collar x 1
Mop Head Attachment x 1
Mop Handle x 1
Microfiber Mop Head x 2
Figure 3
Figure 4
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
