Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#8777E Bentwood End Table
Assembly Instructions
Assembly is now complete.
D
F
E
C
E
F
B
B
A
Step 2 - Place both Legs (Part B) and the Shelf (Part A) upside down on a flat surface. Align the bolt
holes in the Shelf
(Part A) with the bolt holes in the
Legs
(Part B) like shown below. Insert four
Bolts with Washers (Part E) through the holes in the
Shelf
and into the threaded inserts in the
Legs
. Tighten the Bolts using the Allen Wrench (Part F). Do not over tighten the bolts.
Step 3 - Place the Top Frame (Part C) upside down on a flat surface. Align the bolt holes in the
Legs
(Part B) with the bolt holes in the
Top Frame
(Part C) like shown below. Insert four Bolts with
Washers (Part E) through the holes in the
legs
and into the threaded inserts in the underside of
the Top Frame. Tighten the Bolts using the Allen Wrench (Part F). Do not over tighten the bolts.
With help, set the table upright and place the
Top Glass
(Part D) on the
Top Frame
.
