u-blox ODIN-W2 Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 36

u-blox ODIN-W2 Series Скачать руководство пользователя страница 9

ODIN-W2 series - Data Sheet

UBX-14039949 - R05

Advance Information

Functional description

Page 9 of 36

If the scan result contains country information indicating both FCC and country information indicating ETSI, then
the regulatory domain is set to WORLD. In the state transition diagram this is the state WORLD_FINAL. This state
will not be exited until the device is reset.
A new scan is performed every hour to update the regulatory domain.
If the current regulatory domain is ETSI and at least one scan result contains country information indicating FCC
and then the regulatory domain is set to WORLD. In the state transition diagram this is the state WORLD-FINAL.
This state is will not be exited until the device is reset.
If the current regulatory domain is FCC and at least one scan result contains country information indicating ETSI
and then the regulatory domain is set to WORLD. In the state transition diagram this is the state WORLD-FINAL.
This state is will not be exited until the device is reset.
At restart of the device the algorithm is restarted. It is not possible to override the algorithm described by
reconfiguration the device.

Regulatory Domain

Band

Tx Channels

WORLD

2.4 GHz

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11

U-NII-1

36, 40, 44, 48

U-NII-2

52, 56, 60, 64

U-NII-2e

100, 104, 108, 112, 116, 132, 136, 140

U-NII-3

-

ETSI

2.4 GHz

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13

U-NII-1

36, 40, 44, 48

U-NII-2

52, 56, 60, 64

U-NII-2e

100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140

U-NII-3

149, 153, 157, 161, 165

FCC

2.4 GHz

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11

U-NII-1

36, 40, 44, 48

U-NII-2

52, 56, 60, 64

U-NII-2e

100, 104, 108, 112, 116, 132, 136, 140

U-NII-3

149, 153, 157, 161, 165

Table 3: Channel list for supported regulatory domains

The maximum output power is reduced on some channels depending on regulatory requirements. For example,
frequency band edge requirements can limit the output power on channels close to band edges.

«
...
7
8
9
10
11
...
»

Содержание ODIN-W2 Series





































Отзывы:

Нет отзывов