u-blox NORA-W10 Series, Руководство по системной интеграции, Страница: 45 / 56

NORA-W10 series - System integration manual
UBX-22005601 - R04 Regulatory compliance Page 45 of 56
C1-Public
6.9 Australia and New Zealand regulatory compliance
The NORA-W10 modules are compliant with the standards made by the Australian
Communications and Media Authority (ACMA).
The modules are compliant with AS/NZS 4268:2012 standard – Radio equipment and systems – Short
range devices – Limits and methods of standard measurement. The test reports for NORA-W10
modules can be used as part of the product certification and compliance folder. For more information
on the test reports, email the respective support team at the local mail address in your region. See
Contact
For further support and contact information, visit us at www.u-blox.com/support.
To meet the overall Australian and/or New Zealand end product compliance standards, the integrator
must create a compliance folder containing all the relevant compliance test reports such as RF, EMC,
electrical safety and DoC (Declaration of Conformity). It is the responsibility of the integrator to know
what is required in the compliance folder for ACMA compliance.
For more information on Australia compliance, refer to the Australian Communications and Media
Authority web site
http://www.acma.gov.au/ .
For more information on New Zealand compliance, refer to the New Zealand Radio Spectrum
Management Group web site
www.rsm.govt.nz .
6.10 South Africa regulatory compliance
⚠
Approvals are pending for NORA-W101 and NORA-W106.
NORA-W10 series modules are compliant and certified by the Independent Communications
Authority of South Africa (ICASA). End products that are made available for sale or lease or supplied
in any other manner in South Africa shall have a legible label permanently affixed to its exterior
surface. The label shall include the ICASA logo and the ICASA issued license number, as shown in the
figure below. The minimum width and height of the ICASA logo shall be 3 mm. The approval labels
must be purchased by the customer’s local representative directly fro m the approval authority ICASA.
A sample of a NORA-W10 ICASA label is shown below:
More information on registration as a Responsible Integrator and labeling requirements can be found
at the Independent Communications Authority of South Africa (ICASA) web site:
https://www.icasa.org.za
6.11 Safety compliance
For compliance with safety standard EN 62368-1 [14 ], NORA-W10 modules must be supplied with a
Class-2 Limited Power Source.
APPROVED
xx-xxxx/yyyy