LARA-R2 series - System Integration Manual
UBX-16010573 - R12
Approvals
Page 141 of 157
4.4
European Conformance CE mark
LARA-R211 modules have been evaluated against the essential requirements of the Radio Equipment Directive
2014/53/EU.
In order to satisfy the essential requirements of the 2014/53/EU RED, the modules are compliant with the following
standards:
Radio Spectrum Efficiency (Article 3.2):
o
EN 301 511
o
EN 301 908-1
o
EN 301 908-13
Electromagnetic Compatibility (Article 3.1b):
o
EN 301 489-1
o
EN 301 489-52
Health and Safety (Article 3.1a)
o
EN 60950-1
o
EN 62311
Radiofrequency radiation exposure information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between the
radiator and the body of the user or nearby persons. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter except as authorized in the
certification of the product.
The gain of the system antenna(s) used for the LARA-R2 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the
following values for mobile and fixed or mobile operating configurations:
o
LARA-R211 modules:
o
9.3 dBi in 800 MHz, i.e. LTE FDD-20 band
o
2.9 dBi in 900 MHz, i.e. GSM 900 band
o
8.8 dBi in 1800 MHz, i.e. GSM 1800 or LTE FDD-3 band
o
13.0 dBi in 2600 MHz, i.e. LTE FDD-7 band
The conformity assessment procedure for the modules, referred to in Article 17 and detailed in Annex II of Directive
2014/53/EU, has been followed.
Thus, the following marking is included in the product:
