Tysso POP-650-i, Руководство пользователя

Страница: 42 / 133

- 34 -
Default Configuration
Most of the configuration settings are either predefined according to the Load Optimal
Defaults settings which are stored in the BIOS or are automatically detected and
configured without requiring any actions. There are a few settings that you may need to
change depending on your system configuration.
Entering the BIOS Setup Utility
The BIOS Setup Utility can only be operated from the keyboard and all commands are
keyboard commands. The commands are available at the right side of each setup
screen.
The BIOS Setup Utility does not require an operating system to run. After you power up
the system, the BIOS message appears on the screen and the memory count begins.
After the memory test, the me
ssage “Press DEL to run setup” will appear on the screen.
If the message disappears before you respond, restart the system or restart the system
by pressing the
<Ctrl> <Alt> and <Del> keys simultaneously.