Tysso BCP-5500 Series, Руководство пользователя

Страница: 15 / 60

-13-
Press Scan Trigger
(3 Sec)
4.1 Switch On/Off
To switch on the data collector, press and hold the scan trigger for about 3
seconds until data collector switch on.
ON
To switch off the data collector, press and hold the scan trigger for about
5 seconds; the LED indicator of the data collector will blink RED twice and
then switch off.
LED Blink x2 OFF
When the data collector is connected to the host PC, the data collector will
switch on automatically.
4.2 Perform scan and collect data
To perform the scan and collect data, switch on and aim the data collector at
Press Scan Trigger
(5 Sec)