D A T A s h e e T
RM-DCM-2
Door Control Module with Enclosure
Features That Make a Difference:
Full-featured local door control module lowers wiring costs
Complete set of inputs and outputs to control one door
Flexible control options for reader LEDs and beep patterns
Easily expandable
Additional internal etch connections support magnetic lock features
and accommodate local bypass switch
Optional LCD provides clear instructions that help simplify
startup and diagnostics
Status LEDs on inputs and outputs for quick troubleshooting
Built-in tamper switch provides secure installation
Plug-in screw terminals reduce installation time
Put a full-featured RM-4E door control module in a UL listed,
tamper-protected enclosure and you have the powerful
Software House
®
RM-DCM-2. RM-DCM-2 is designed to
support up to two RM-4Es and a choice of up to two I8 input
boards or R8 output boards, providing a single enclosure for
doors with IN and OUT readers.
RM-DCM-2 supports both Wiegand and magnetic stripe
readers and provides additional wiring to magnetic locks
if required.
The RM-4E modules create the connectivity between a reader
and a control panel when third party card readers are used on
a C•CURE
®
system. In addition, the RM-4E modules provide
two supervised inputs and two SPDT relays (no ARM-1s
are necessary). The LEDs and optional LCD display provide
diagnostics to simplify the installation.
RM-DCM-2 provides standby power with its built-in
uninterruptible power supply (UPS).
With its robust feature set, RM-DCM-2 is designed to handle
the most demanding access control applications with ease
while offering numerous installation and service features that
lower its life cycle cost.
Shown with optional I8 input module,
R8 output module, and battery
