PowerSeries - PC1616/PC1832/PC1864
22
6HFWLRQ>@7HVW7UDQVPLVVLRQ7LPH
Program the time the system will report a Test Transmission reporting event. Program 4 digits –
[HH][MM]
using military standard.
For a test transmission at 11:00 pm, program data
[23][00]
). Valid entries are
[00][00]
to
[23][59].
6HFWLRQ>@3HULRGLF'/67LPHRI'D\
Programs the time the system will auto-call DLS. Program 4 digits –
[HH][MM]
using military standard. For a DLS auto-call at 11:00 pm,
program data
[23][00]
). Valid entries are
[00][00]
to
[23][59].
Programming
[99][99]
will select a random time,
[FF][FF]
will disable it.
6HFWLRQ>@)LUVW&RPPXQLFDWRU2SWLRQ&RGH
6HFWLRQ>@6HFRQG&RPPXQLFDWRU2SWLRQ&RGH
6HFWLRQ>@7KLUG&RPPXQLFDWRU2SWLRQ&RGH
Delinquency Transmission Delay:
Number of hours (Activity Delinquency) or days (Arming Delinquency) the panel will delay before
transmitting the event to the central station. Valid entries:
[001]
to
[255]
.
Communication Cancel Window:
Time, in minutes, after an alarm has occurred that the system will report a Communication Cancel
reporting event if the system is disarmed. They keypad will beep rapidly to indicate the Communication Cancel reporting event has been
communicated successfully. Valid entries:
[001]
to
[255]
.
Option
Description
[1]
ON:
The system communicator is enabled.
OFF:
The communicator is disabled.
[2]
ON:
The system transmits alarm restorals if the zone is restored and the bell has timed out.
OFF:
The system transmits alarm restorals immediately when the zone is restored.
[3]
ON:
The panel uses rotary (pulse) dialing.
OFF:
The panel uses touchtone (DTMF) dialing
[4]
ON:
The panel will switch from touchtone dialing to rotary dialing after the 4th failed attempt to communicate.
OFF:
The panel will use DTMF dialing for all dialing attempts.
[5]
ON:
The system uses the Third Phone Number to back up the First Phone Number.
OFF:
the Third Phone Number is disabled.
[6]
ON:
The system alternates between the First Phone Number and Third Phone Number when attempting to report an event.
OFF:
The panel will dial the First Phone Number for the programmed number of attempts, then switch to the Third Phone Number.
[7]
For Future Use
[8]
ON:
The Delinquency feature follows zone activity.
OFF:
The Delinquency feature follows arming.
Option
Description
[1]
ON:
The keypad beeps 8 times after successfully transmitting the
Opening After Alarm
reporting event.
OFF:
The keypad does not beep.
[2]
ON:
The bell output squawks 8 times after successfully transmitting the
Opening After Alarm
reporting event.
OFF:
The bell output does not activate.
[3]
ON:
The system uses programmed reporting codes when transmitting using the SIA format.
OFF:
The system automatically generates all reporting codes transmitted.
[4]
ON:
The system beeps the keypad 8 times after successfully transmitting a
Closing
reporting event.
OFF:
the keypad does not beep.
[5]
ON:
The system requests a
Listen in/Two-way
session the next time it calls the
1st/3rd Phone Number
when the PC59xx transmits
a request.
OFF:
The system ignores the request from the PC59xx.
This Option is used with PC59xx series modules.
[6]
ON:
The system requests a
Listen in/Two-way
session the next time it calls the
2nd Phone Number
when the PC59xx transmits a
request.
OFF:
The system will ignore the request from the PC59xx.
This Option is used with PC59xx series modules.
[7]
ON:
The system uses
Contact ID format
programmed reporting codes when transmitting reporting codes.
OFF:
The system automatically generates all reporting codes transmitted.
[8]
For Future Use
Option
Description
[1]
ON:
The system will use the digit
[5]
as the first digit of the Partial Closing reporting code when transmitting Contact ID reporting codes.
OFF:
The system will use the digit
[4]
as the first digit of the Partial Closing reporting code when transmitting Contact ID reporting codes.
[2]
ON:
The system will transmit all alarms during Walk Test.
OFF:
The system will not report alarm events during Walk Test.
firealarmresources.com
Содержание DSC PowerSeries PC1616
Страница 2: ...firealarmresources com...
