PowerSeries - PC1616/PC1832/PC1864
18
6HFWLRQ>@7HQWK6\VWHP2SWLRQ&RGH
6HFWLRQ>@)DVW/RRS5HVSRQVH
This section is used to determine the Loop Response Time for the main panel zones.
6HFWLRQ>@WR>@=RQH$WWULEXWHV
These sections are used to customize the operation of the zones. There are 16 toggle options in each Section:
[6]
ON:
RF Delinquency Enabled, if any wireless zone supervisory transmission is not received by the PC5132 during a 15-minute period,
the PC5132 will place the panel into Not Ready To Arm mode. In the armed state, the Zone faults will generate tamper alarms. The
panel will generate a silent trouble (NO trouble beeps but the Trouble LED is turned ON) called “RF Device Delinquency”, that’s only
viewable in [
][2] (Trouble Memory). The user can override the condition and arm the panel by using the feature.
OFF:
RF Delinquency Disabled, the system will not indicate an RF Delinquency when a zone supervisory transmission is not
received during a 15 minute period.
[7]
ON:
Arming will be cancelled if a zone is open at the end of exit delay.
OFF:
If a zone is open at the end of exit delay the system will arm with the zone open.
[8]
ON:
When the system is armed in Stay mode, during the Exit delay, the system will sound 1 beep every 3 second.
OFF
: When the system is armed in Stay mode, the system will be silent during the Exit delay.
Option
Description
[1]
ON:
The keypad
[F]
emergency key will only beep three times to acknowledge the button has been pressed. The system will not
activate the bell output.
OFF:
The system will activate the bell output and beep the keypad.
[2]
ON:
200 Baud Open/Close Identifier Toggle 200 Baud Open Close Identifier is 2 for arming 1 for disarming.
OFF:
200 Baud Open/Close Identifier Toggle 200 Baud Open Close Identifier is 1 for arming 2 for disarming
[3]
ON:
The system will only transmit the Test Transmission reporting code if the system is armed at the time the system is
programmed to report the event.
OFF:
The system will always report the Test Transmission reporting code at the programmed time.
[4]
ON:
The system changes the Test Transmission Reporting Cycle Time from
Days
to
Hours
.
OFF:
The Test Transmission Reporting Cycle Time is in
Days
.
[5]
ON:
The user cannot switch from Away Arm mode to Stay Arm mode using the function keys.
OFF:
The user can switch arming modes.
[6]
ON:
The system does NOT disconnect. New events are transmitted only after the session is terminated.
OFF:
The system disconnects a listen in/two-way session if a new event occurs.
[7]
ON:
The system does
NOT
activate the keypad buzzer for any trouble condition (excluding Fire Troubles).
OFF:
The system annunciates troubles via the keypad buzzer (two beeps every 10 seconds) normally.
[8]
ON:
Keyswitches will always arm in away mode.
OFF:
Keyswitches will arm in away mode if an entry/exit zone is violated during exit delay.
ON:
The loop response time will be 36 mS.
OFF:
The loop response time will be 400 mS.
Option
Description
[1]
ON:
Alarms are audible (bell output).
OFF:
Alarms are silent.
[2]
ON:
The bell output is steady (burglary).
OFF:
The alarm output pulses (fire).
[3]
ON:
A zone violation or restoral will activate Chime.
OFF:
Chime is not activated.
[4]
ON:
The user can manually bypass the zone using the
[
][1]
command.
OFF:
The zone cannot be manually bypassed.
[5]
ON:
The partition can be armed even if the zone is violated (the zone will not affect the Ready status).
OFF:
The zone must be secure before arming.
[6]
ON:
The system shuts down alarm reporting after the programmed number of alarms have occurred.
OFF:
The panel will always report the event if an alarm occurs.
[7]
ON:
The system delays reporting the event for the time programmed for the Transmission Delay time.
OFF:
The panel immediately transmits the reporting event when an alarm is detected.
[8]
ON:
The zone is either a wireless or addressable device.
OFF:
The zone is a hardwire zone (main panel, zone expander or keypad zone).
[9]
ON:
The zone has the Cross Zone feature enabled.
OFF:
The zone functions normally.
[10]-[13]
For Future Use
firealarmresources.com
Содержание DSC PowerSeries PC1616
Страница 2: ...firealarmresources com...
