background image

1

http://www.tyan.com

Trinity i845

S2090

User’s Manual

Revision 1.00

Copyright © Tyan Computer Corporation, 2001. All rights reserved. No part of this manual may be
reproduced or translated without prior written consent from Tyan Computer Corp.

All registered and unregistered trademarks and company names contained in this manual are
property of their respective owners including, but not limited to the following.

Tyan, Trinity S2090 are trademarks of Tyan Computer Corporation.
Intel, Intel Pentium, i845, combinations thereof are trademarks of Intel Corporation.
Award BIOS is a trademark of Phoenix Software.
Microsoft, Windows are trademarks of Microsoft Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
Winbond is a trademark of Winbond Electronics Corporation.
Micronics is a trademark of Micronics Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corporation.
Iomega, Zip are registered trademarks of Iomega Corporation.

Information contained in this document is furnished by Tyan Computer Corporation and has been
reviewed for accuracy and reliability prior to printing. Tyan assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to sale and/or use of Tyan products including
liability or warranties relating to fitness for a particular purpose or merchantability. Tyan retains the
right to make changes to product descriptions and/or specifications at any time, without notice. In
no event will Tyan be held liable for any direct or indirect, incidental or consequential damage, loss
of use, loss of data or other malady resulting from errors or inaccuracies of information contained in
this document.

Содержание TRINITY I845










































Отзывы: