background image

 

 

http://www.TYAN.com  

 

 

 

Thunder i7505 

/// 

S2665 

 

Revision 1.02

 

 

 

Copyright © TYAN Computer Corporation, 2002. All rights reserved. No part of this manual may be 
reproduced or translated without prior written consent from TYAN Computer Corp.  
 
 
All registered and unregistered trademarks and company names contained in this manual are 
property of their respective owners including, but not limited to the following.  
 
TYAN, Thunder i7505 S2665 are trademarks of TYAN Computer Corporation. 
Intel, Xeon, and combinations thereof are trademarks of Intel Corporation. 
Microsoft and Windows are trademarks of Microsoft Corporation.  
Phoenix BIOS is a trademark of Phoenix Technologies. 
Winbond is a trademark of Winbond Electronics Corporation. 

Adaptec is a trademark of Adaptec Inc.  

AnalogDevice and ADM are trademarks of Analog Devices Inc.  
Sony/Philips Digital Interface (SPDIF) is a trademark of Sony Corporation and Philips Electronics. 
PS/2 is a trademark of International Business Machines Corporation. 
Portable Document Format (PDF) is a trademark of Adobe Corporation. 
 
 
 
 
Information contained in this document is furnished by TYAN Computer Corporation and has been 
reviewed for accuracy and reliability prior to printing. TYAN assumes no liability and disclaims any 
express or implied warranty rela ting to sale and/or use of TYAN products; we also assume no 
including liability or warranties relating to fitness for a particular purpose or merchantability. TYAN 
retains the right to make changes to product descriptions and/or specifications at any time  without 
notice. In no event will TYAN be held liable for any direct or indirect, incidental or consequential 
damage, loss of use, loss of data or other malady resulting from errors or inaccuracies of 
information contained in this document. 

 
 
 

Содержание THUNDER I7505









































Отзывы: