32
2.1.2 Installing the CPU and Heatsink
Follow the steps below on installing CPUs and CPU heatsinks.
1. TN70E-B7106 has two CPU sockets.
2. Align and install the processor on the carrier.
3. Carefully flip the heatsink. Then install the carrier assembly on the bottom of the
heatsink and make sure the gold arrow is located in the correct direction.
NOTE:
A new heatsink comes with pre-applied thermal grease. Once the heatsink
has been removed from the processor, you need to clean the processor and
heatsink using an alcohol solvent. Then apply new thermal grease before reinstalling
the heatsink.
Содержание B7106T70EV12HR
