IMPORTANT!
Always reduce the RF Output power to minimum before changing
the transmission frequency. Once the new frequency is active,
slowly increase the RF output power control to provide the
required power output level.
WARNING!
Never operate this device without a suitable 50 ohm load
connected to the RF OUTPUT socket, or without a suitably
installed and matched antenna system connected. Although the
output of this RF amplifier is protected against antenna load
faults, MIS-OPERATION MAY RESULT IN DAMAGE NOT COVERED
BY ANY WARRANTY.
IMPORTANT!
Correct operation of the cooling fans in this product is vital to
reliable continuous operation. Schedule bi-annual maintenance
checks. We strongly advise the use of a standby RF amplifier
system for use during maintenance events or fault conditions, to
prevent prolonged breaks in transmission.
IMPORTANT!
Consideration should be given to fitting a suitably rated UPS if
power interruptions are likely. Similarly, telemetry reset of power
may be advisable for equipment in remote areas, or having
restricted access arrangements.
