Two Technologies TechTerm TT1R2, Техническое справочное руководство

Страница: 35 / 50

TECHTERM TECHNICAL REFERENCE MANUAL
Document 15776(1.0.0.0) 25
Escape Command Summary
The following table is a summary of the available host commands.
Table 5-1: Host Command Summary
Command Code/Syntax
Cursor Up Esc A
Cursor Down Esc B
Cursor Right Esc C
Cursor Left Esc D
Cursor Home & Clear Display Esc E
Enable Underscore Cursor Esc F
Disable Underscore Cursor Esc G
Cursor Home Esc H
Erase Display Esc I
Erase Cursor to End of Display Esc J
Erase Cursor to End of Line Esc K
Long Bell Esc L
Erase Entire Line Esc M
Click Esc P
Alert Esc Q
Enable Blinking Cursor Esc R
Disable Blinking Cursor Esc S
Short Bell Esc T
Enable Key Click Esc U
Disable Key Click Esc V
Cursor Position Esc Y Pr Pc
Return Terminal Identifier String Esc Z
Control Code Commands
The host can control some of TechTerm’s functionality by sending it commands that start
with the Control character. For example, sending a Ctrl G will sound the bell on the
TechTerm.
Table 5-2: Control Codes
Command Code
Send ENQ Ctrl E
Sounds Bell Ctrl G
Back Space Cursor Ctrl H
Line Feed Ctrl J
Cursor Down Ctrl K
Cursor Left to Column 1 Ctrl M
Delete Character at Cursor DEL