IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
Installation Instructions
1
Muffler Canister
Varies
1
Muffler Clamp
Varies
1
Slip-on Tube
005-24104S
1
HARDWARE KIT
005-328-3
1
X-Ring Kit
005-7-2-3KIT
1
Fender Bracket
005-19904B
2
Lighted License Plate Bolt
005-8504LTZ
1
Turn Signals (set of 2)
005-88T2
6
Butt Splice Connectors
005-BS1614
1
Zip Tie
005-ZT458B
1
Zip Tie Tab
005-ZTM4
1
Muffler Bracket
005-328-B
2
8x40mm Socket Head Cap Screw
005-SH840
4
6mm Flange Nut
005-FN6
1
8x16mm Flange Bolt
005-FB816
3
8mm Flange Nut
005-FN8
1
TBR Sticker Kit
015-10212
Kawasaki
ZX-6R
V.A.L.E.™ Slip-on Exhaust System with M-2 Canister
Part # 005-32804xV
Parts List
1. Make sure the bike is completely cool before
starting the installation. Make sure the bike is
secure on a centerstand or ideally a service lift.
2. Remove side covers and seat.
3. Remove rear passenger seat.
4. Remove OEM rear fender. You will reuse the
fender bolts.
5. Remove rear exhaust cover.
6. Remove exhaust valve cables from servo under
seat. Use a wrench to hold server wheel in place
or internal gears may break.
*Keep servo plugged
into harness but cables
will not be used.
7.
Remove OEM muffler assembly.
8. Remove OEM sound box.
9. Attach TBR muffler to slip-on tube using 2 piece
X-Ring and the 4 6x14mm S.H.C.S. and lock
washers provided. Leave loose for now.
10. Remove both rear set mounting bolts and replace
with supplied 8x40mm socket head cap screw.
11. Attach the supplied mounting bracket to the inside
of frame and secure in place with the supplied
8mm flange nuts. Bracket should be installed as
shown in picture.
