MODELS: DFS-305-01, DFS-305-02, DFS-305-03, DFS-305-04, DFS-305-05
- MAIN POWER
Made in China
Printed in China
© 2015,Twin-Star International,Inc.
3. Pinch this spring clip to
loosen. Gently turn and pull the
rubber grommet of the motor
shaft.
REPLACING THE LIGHT BULB
VOLTAGE
120 VAC, 60 Hz
AMPS
12.5 Amps
WATTS
1500 Watts
OPERATING INSTRUCTIONS
PRODUCT SPECIFICATIONS
The Power switch supplies power to all of the
functions of the Fire Cube including the flame
effect and heater.
NOTE:Main Power must be turned to ON for the
heat to be used.
To turn on low heat, turn the heater knob to the
750W position.
750W- LOW HEAT
For Customer Service:
www.twinstarhome.com
888-674-7517
8:30 a.m.-5:30 p.m., EST, Monday-Friday
Pull
Pull
Light bulb retaining spring
1. Loosen the Phillips head
screws and remove back panel.
2. Remove back panel to access
light bulb
Distributed by
Twin-Star International, Inc. Under license.
duraflame™ and the duraflame flame
logo are trademarks of Duraflame, Inc.
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China • Printed in China
Note: When first running the heater there can
be an odor. This is normal, the heater has a
surface coating on the internal parts, for the
first several hours of operation the coating
reacts with the internal parts to permanently
protect them. The odor is safe; if you are
sensitive to the odor it
is recommended
to run the heater in
a well-ventilated area
until the odor
dissipates.
Warning: This is an unvented, electric appliance.
DO NOT attempt to burn wood or manufactured
firelogs in or
on this appliance or grate.
4. Pull away the bulb retaining
spring, unscrew the old bulb,
and replace with a new 40w
candelabra bulb.
Spinner
Motor
Assembly
Light bulb
1500W- HIGH HEAT
To turn on high heat turn the knob all the way to
the 1500W position.
Control Panel
The control panel can be found on the top left corner on the back
side of the unit.
Go to www.tsicustomerservice.com for product warranty registration
