background image

19

CARE AND CLEANING

!

CAUTION

SHOCK HAZARD: 

Disconnect electrical power from the 

appliance before cleaning with soap and water.

Figure 45

Tap Cleaning Kit

This is an optional item (part number S19906) Kit includes 

everything to quickly clean tap. Includes cleaning solution, 

pump, mixing bottle, brush and wrench.

Cabinet

The stainless steel cabinet can be washed with either a 

mild soap and water and thoroughly rinsed with clear water. 

NEVER use abrasive scouring cleaners. Dry thoroughly 

with a terry towel.

Interior

Wash interior compartment with mild soap and water. Do 

NOT use an abrasive cleaner, solvent, polish cleaner or 

undiluted detergent.

Care of Appliance

1.  Avoid leaning on the door, you may bend the door 

hinges or tip the appliance.

2.  Exercise caution when sweeping, vacuuming or mop-

ping near the front of the appliance. Damage to the 

grille can occur.

3.  Periodically clean the interior of the appliance as 

needed.

In the Event of a Power Failure

If a power failure occurs, try to correct it as soon as pos-

sible. Minimize the number of door openings while the 

power is off so as not to adversely affect the appliance's 

temperature. 

Front Grille

Be sure that nothing obstructs the required air flow open-

ings in front of the cabinet. At least once or twice a year, 

brush or vacuum lint and dirt from the front grille area (see 

page 4).

Cleaning the beer line (using tap cleaning kit 

S19906):

With the faucet removed from the tower (see page 18) and 

the keg coupler removed from the keg (see page 18), place 

the end of the beer line in a pail or pan. Secure the pump 

to the tower with the coupler nut provided on the pump 

assembly. Pump a sanitizer / cleaner through the beer line 

until clean. Rinse the pump bottle with hot water, and using 

the pump, flush the beer line 2 or 3 times with clean hot 

water.

Pail or pan

beer line

Pump connected 

to tower

Содержание TEBK24-F





























Отзывы: