Twin Disc TA-90-8501, Руководство оператора, Страница: 10 / 152

10
Twin Disc, Incorporated
Power Shift Transmission System Operator’s Manual #1020510
Introduction
Replacement Parts
Parts Lists
Engineering assembly drawings are provided in appropriate sections of this
manual to facilitate ordering spare or replacement parts. Current bill of
materials are available from Twin Disc or the nearest Authorized Twin Disc
Distributor.
Ordering Parts
All replacement parts or products (including hoses and fittings) must
be of Twin Disc origin or equal, and otherwise identical with components
of the original equipment. Use of any other parts or products will void
the warranty and may result in malfunction or accident, causing injury
to personnel and /or serious damage to the equipment.
Renewal parts and service parts kits may be obtained from any authorized
Twin Disc distributor or service dealer.
Parts Shipment
Furnish the complete shipping information and postal address. All parts
shipments made from the factory will be FOB factory location, USA. State
specifically whether the parts are to be shipped by freight, express, etc. If
shipping instructions are not specified, the equipment will be shipped the
best way, considering time and expense. Twin Disc, Incorporated will not
be responsible for any charges incurred by this procedure.
Twin Disc, Incorporated having stipulated the bill of material number on the
unit’s nameplate absolves itself of any responsibility resulting from any
external, internal or installation changes made in the field without the express
written approval of Twin Disc. All returned parts, new or old, emanating
from any of the above-stated changes will
not be accepted for credit.
Furthermore, any equipment which has been subjected to such changes will
not be covered by a Twin Disc warranty.