twaudio QBM10, Инструкция по сборке

Страница: 12 / 16

Assembly Instructions QBM10
12
4.5 Assembly QBM10 swivel bracket to trusses, ceiling or wall
For installation purposes, attach the QBM10 swivel bracket to the ceiling or wall by using all
three holes located on the crossbar. Make sure that you use suitable fastening material and
that the connections are set firmly and correctly!
WARNING
Figure 4.5 - Assembly QBM10 with M10 to ceiling
WARNING
Attach the DHST Doughty Halfcoupler Slimline to the ø12.2mm hole located on the crossbar
of the QBM10 swivel bracket when using the QBM10 swivel bracket on trusses. Make sure
that the connections are set firmly and correctly!