twall Premium64, Руководство пользователя

Страница: 35 / 40

t wall
®
Premium64 standard Color mobile / stationary User manual | Rev. 1.0.3
E| 35
The following parameters are defined for the sequence:
wait until precisely this key was pressed:
this is the standard set-
ting. The next target in the programme will only be activated when the
current target is deactivated or the time-out has expired.
Wait until any active key was pressed:
the next target in the programme will only
be activated when an active (illuminated) key is deactivated or the time-out has expired.
Wait until any key was pressed:
the next target in the programme will only be
activated when any key - active or not - was pressed or the time-out has expired.
Wait until the last active key was pressed:
the next target in the pro-
gramme will only be activated when the last active (illuminated) key has been de-
activated or the time-out has expired. This mode is especially helpful when
numerous key fields on the
t
wall
®
light up and all need to be deactivated be-
fore the programme is ended or the programme sequence continues.
Don't wait:
the next target is activated immediately after the key field is switched
on. This mode is required to connect numerous key fields simultaneously.
The following functions are available to edit the targets in the list:
Adds a new element to the list by duplicating the currently selected or the
last element in the list.
Deletes the selected elements from the list.
These keys move the selected element one position down
or up.
Deletes the entire list
8.4.6 Editing t
wall
®
programmes
To edit
t
wall
®
programmes at a later date, click on [Edit existing programmes] on the start page.
Then select the programme to be edited from the options display. In other respects, editing a
programme is similar to creating new programmes.
8.4.7 Editing sound sets
Using sound sets, specific events of a
t
wall
®
programme can be assigned sounds. Each
t
wall
®
programme can be assigned a sound set
2
.
In order to transfer the sounds to the
t
wall
®
, the programme must first be transferred from the
computer to the
t
wall
®
and then saved
(see Chapter 8.4.3.1)
. The sounds are then automati-
cally transferred to the SD card on the
t
wall
®
(the card must be inserted into the SD card slot).
2
Only works with
t
wall
®
models with sound support.