TW Audio M12i, Руководство по эксплуатации

Страница: 9 / 14

Operation manual M12i
9
4.1 Setup
The M12i loudspeaker is designed for hanging, vertical and horizontal operation. TW AUDiO
provides a wide range of accessories to securely attach the loudspeaker.
TW AUDiO recommends using only the accessories specified by TW AUDiO for securing and
mounting loudspeakers.
NOTE
Make sure the speakers are securely fastened to prevent personal injury and property damage.
WARNING
4. Commissioning
4.2 M10 threaded inserts
Before fitting the accessories follow the subsequent steps:
4. For the M12i loudspeaker M10 threaded inserts, various TW AUDiO accessories can be
mounted. For each product refer to the instructions.
5. Note that the load capacity is limited to a single speaker.
3. Please note that once the countersunk screws are removed, water and moisture may
enter into the enclosure.
1. To remove the countersunk screws remove the texture paint by using a cutter knife. Avoid
damaging the surrounding paint to prevent chipping.
2. Remove for your application required countersunk screws. Use a hexalobular key with the
size of TX50.
NOTE
WARNING
Make sure that all system structures are located on a firm, level surface and that the surface
can bear the total weight!
WARNING