TVT TD-A510-MTC-E, Руководство пользователя

Страница: 9 / 71

NVMS User Manual
3
2 Login
2.1 Login
Before starting, please make sure network cable, monitor and power are connected. After the server is started, the following window will
appear as shown below.
①
Enter username and password (the default username is admin; the default password is 123456).
②
Check “Remember Password” or “Auto Login” as needed.
③
Click [Login].
If you forget the password, please click “Forgotten password”. Then a small window will appear. You can get the IP address of the
authentication server, the config server port and the encrypted password in this interface. After that, send these information to the technical
supporter to obtain the original password.
2.2 Main Menu Interface Introduction
There are five parts in the main menu interface. The descriptions of each part are as shown below.
Menu Bar