TVT TD-A510-MTC-E, Руководство пользователя

Страница: 20 / 71

NVMS User Manual
14

Full Screen Display
In the live view interface, click button on the toolbar or right click on the mouse to select “Full Screen” to display the window in full
screen mode. Right click on the mouse to select “Exit Full Screen” on the full screen interface to exit full screen.

Single Channel Display
Double click a window to view in single channel mode. Double click the window again to recover the window.

Stream Setting
Right click on the live view window to choose video stream. Or select self-adaptive stream or other stream on the toolbar to set the stream
for all channels.
To set streams
Go to Home
 Configure Device and Monitoring Spot. Select the device and click “Channel Stream Setting” tab to set streams.

Audio Control
Right click on the live view window and then choose “Audio On” or click
on the toolbar of the window to enable audio.
Note : Only one audio can be enabled at the same time. If the audio of one channel is enabled, the former audio will be disabled
automatically.

Zoom In or Out
In the live view interface, click on the live view window to zoom in the window and then drag the image to view the whole image;
click to zoom out the image; click to restore the image size.
4.3 Snapshot
Select a window in which the video is playing and then click on the toolbar of this window or right click on the window and then
select “Snapshot”. A prompt box will appear if the picture is captured successfully.
Note : Only when the video is playing in the window, will the snapshot succeed.
.
4.4 Multi-Screen View
In the live view interface, multi-screen view can be realized by holding a tab and dragging it to other monitors (graphics card should
support multi-screen output at the same time).