39
39
MODE AND SET BUTTONS
A
B
The Mode (A) and Set (B) buttons are provided to
change between various modes and to set the some
of the digital display functions of the instrument
cluster. The sequence of modes and their selections
are explained in detail below.
Press the Mode button to access the following
modes:
1. ODO
2. TRIP 1
3. TRIP 2
4. HIGH SPEED INDICATOR
5. SHORTEST TIME INDICATOR
Setting the digital display
Every press of the Mode button changes the display
to other mode. Follow the below procedures to
change the display to desired mode.
If the ignition is turned ‘OFF’ while the cluster is in
‘ODO’ or ‘TRIP’ mode, then the respective meter will
be displayed during next ignition ‘ON’. If any other
modes other than the above were set during ignition
‘OFF’, then ‘ODO’ meter will be displayed by default
during next ignition ‘ON’.
1. In ‘ODO’ mode, press the Mode button once and
twice to enter ‘ ’ and ‘ ’ meters
respectively.
• To reset any of the trip meter while ensuring
the display is in ‘TRIP 1’ or ‘TRIP 2’, press and
hold the Set button for a few seconds.
2. In ‘TRIP 2’ meter mode, press the Mode button
to enter high speed mode. On entering this
mode, a message ‘ ‘ and last achieved
high speed data will be displayed in the cluster’s
display.
• To reset the high speed recorded, keep the
display in ‘HIGH SPEED’, press and hold the
Set button for a few seconds.
