PDF-MG-KVM-83x-V1.00
11
9.
Switch on your PC and monitors.
10.
If you’re using a network switch, connect the power supply to
an electrical outlet.
11.
Switch on the encoder and decoder.
Your Pathfinder devices start.
Setting up your system in Pathfinder Control
Use Pathfinder Control to set up your system and upgrade your
firmware.
To set up your system in Pathfinder Control
1.
Install Pathfinder Control on a dedicated PC connected to the
Pathfinder network.
Download Pathfinder Control from
tvone.com/softwares
.
2.
Open Pathfinder Control and log in as an administrator. The
default username is
admin
, and the default password is
admin
.
If your Pathfinder network includes a network switch,
Pathfinder Control must run on your Pathfinder network at
all times. You don’t have to be logged in.
This task is for administrators.
