About embedded audio
n
You can play embedded audio from any input port on any input module, as long as the embedded audio is in
uncompressed PCM format, at 48 kHz.
n
You can play embedded audio, and audio from the S/PDIF and analog audio module, on any output device
associated with your video wall.
n
CORIOmaster supports 2-channel audio, and does not support surround sound.
n
You can only play audio from the S/PDIF and analog audio module in breakaway audio mode.
Disabling and enabling audio for a source or display
If you never want to hear a source, or you never want to play audio on a specific display, you can disable it.
Administrators can disable audio from
Settings
>
Slot Status
.
Administrators and power users can disable audio from
Editor
>
Properties
.
Users cannot re-enable the audio, so if you want other users to be able to restore audio, mute the source or display instead.
When the audio from a source is disabled, it is not available to select from the wall editor or the dashboard. When
the audio to a display is disabled, the button to mute and unmute audio on that display is not available from
Displays & Windows
.
Disabling and enabling audio from
Slot Status
Administrators can disable and enable sources and outputs.
1. Select
Settings
>
Slot Status
.
2. Select or clear
Audio Enabled
.
PDF-CM2-547-V1.0 tvONE
61
Содержание CORIOmaster2 CM2-547
Страница 122: ......