background image

1.0 

INTRODUCTION 

Thanks for purchasing this MX-5288 8x8 DVI-D Matrix Switcher from tvONE. The MX-5288 
is designed to distribute up to 8 DVI inputs to 8 different destinations or to one destination. 
This matrix enables the distribution of multiple video outputs to multiple displays. The MX-
5288 supports DVI-D (w/o HDCP) video at resolutions from VGA through WUXGA. The 
video quality is excellent and the switcher uses single link (4.95Gbps/165Mhz) video 
processing circuitry. The MX-5288 DVI-D Matrix Switcher offers a convenient and cost 
effective method for the switching of high quality PC graphics and HD video. The MX-5288 
is ready to provide a DVI matrix switching solution ideal for boardroom, showroom, or 
exhibition use. Regardless of whether you use the IR remote, RS-232, Ethernet, or the front 
panel push button operation, control of the MX-5288 couldn’t be easier. 

Our professional video conversion products have been serving the industry for over 
twenty years. tvONE offers a full line of high quality Seamless Switchers, Video Scalers, 
Up/Down/Cross Converters, Analog-Digital Converters (SD/HD-SDI, HDMI, DVI), Format 
Converters, Standards Converters, TBC/Frame Synchronizers, Matrix Routing Switchers, 
Signal Distribution Amplifiers and Cat.5/6 Transmission Systems. 

1.1 

Liability Statement 

Every effort has been made to ensure that this product is free of errors. tvONE cannot be 
held liable for the use of this hardware or any direct or indirect consequential damages 
arising from its use. It is the responsibility of the user of the hardware to check that it is 
suitable for his/her requirements and that it is installed correctly. All rights reserved. No 
parts of this manual may be reproduced or transmitted by any form or means electronic or 
mechanical, including photocopying, recording or by any information storage or retrieval 
system without the written consent of the publisher. 

tvONE reserves the right to revise any of its hardware and software following its policy to 
modify and/or improve its products where necessary or desirable. This statement does not 
affect the legal rights of the user in any way.  

All third party trademarks and copyrights are recognised.  The tvONE logo and CORIO 
logo are the registered trademarks of tvONE. All other trademarks are the property of their 
respective holders. 

1.2 

Features 

The MX-5288 8x8 DVI-D Matrix Switcher has many features that enable it to perform in a 
superior manner. Among these features you will find: 
 

 

8x DVI-D inputs via DVI-I Connectors 

 

8x DVI-D outputs via DVI-I Connectors 

 

DVI-D (w/o HDCP) video signal 

 

Power-fail protection provided by 
switcher memory 

 

Front panel button controllable 

 

RS-232 controllable 

 

IR remote controllable  

 

Ethernet controllable 

 

1RU Rack mountable

Содержание MX-5288

















Отзывы: