Wi-Fi Smart Combustible Gas Alarm Manual
Product Review:
This product is a WiFi flammable gas alarm, which is used to detect the leakage of flammable gas and prevent the harm
caused by gas leakage. The alarm uses high stability semiconductor gas sensor, which has the characteristics of high
stability and small sensitivity drift. When a flammable gas leak is detected and the concentration value set by
the alarm is reached, the alarm will send an alarm signal. This product is used indoor where leakage may occur, such as
kitchens.
Before installation, please confirm the detecting gas density heavier or lighter than air. If detecting gas is heavier than air:
LPG. etc, install at 0.3-1m height from floor, semi-diameter to gas source less than 1.5m. If detecting gas is lighter than
air: nature gas, manufactured gas, marsh gas, etc, install at 0.3-1m height from ceiling, semi-diameter to gas source less
than 1.5m.
Specification:
Working Voltage: AC 85V-250V
Average Consumption: ≤1.5W
Alarm Sound: 70dB/m
Alarm Density:6%LEL ± 3%LEL
（
CH4
）
WIFI Standard: 802.11b/g/n
Working Temperature: -10 ~ +50
℃
℃
Working Humidity:≤95%RH
How to use:
1. Download Tuya Smart APP, or scan the QR
code below to download
2. Insert the gas detector into socket, starting
network configuration automatically, Green
LED flashes quickly.
* If the network is not configured, only the green LED is on. After the network is successfully configured,
the three-color LED blinks alternately. LED will be in Green before Warm up finish. It will take 5 minutes to warm up.
3. Use the mobile phone number to register
the APP to log in, click "+" on the "My Home"
screen or click "Add Device" in the middle
blank, select security sensor, and click on the
gas sensor (WiFi)
4. When Power on, the green indicator does
not flash quickly, use the pin to press the
RESET button for more than 5 seconds, the
indicator flashes quickly, means starting
network configuration automatically. Input
"WIFI password" in the APP according to the
prompt, and click ENTER.
